Wynniatt Bay depth map

Bay: average depth about 85 m, deepest 199 m (GEBCO_2026 grid).

Tap or scroll to load the interactive map

Sea level todayDrag the slider to lower the sea and see the land that would appear.

Sea level in metres below today’s. A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how the water would really drain.

Key

Sea depth

  • Deeper than 6,000 m
  • 4,000 to 6,000 m
  • 2,000 to 4,000 m
  • 1,000 to 2,000 m
  • 200 to 1,000 m
  • Shallower than 200 m (the continental shelf)

Land height

  • Land up to 500 m
  • 500 to 2,000 m
  • Above 2,000 m

Drain the oceans

  • Seabed exposed when the sea is lowered A dashed white line marks today’s coast.

How to read the map. Darker blue is deeper water. Tap anywhere to see how deep the sea is there, or how high the land is, and the nearest named undersea feature. Depths come from the GEBCO_2026 grid, which in most of the deep ocean is predicted from satellite measurements of the sea surface rather than surveyed by ship, and the map’s tiles are coarser than the grid, so narrow trenches read shallower on the map than their true depth. Not for navigation.

Wynniatt Bay at a glance

  • 85 maverage depth
  • 89 mmedian depth
  • 199 mmaximum depth
  • 1,124 km²water area

Wynniatt Bay is a bay. Inside its outline the GEBCO grid has about 1,124 km² of water, with an average depth of about 85 m (the middle value is 89 m) and a maximum of 199 m, found at 72.69° N, 110.47° W.

Open the map at the deepest cell and tap to read the depth.

How deep is each part of the Wynniatt Bay?

The bar splits the Wynniatt Bay's water by depth. Each colour is a depth band, and the shares add up to 100%.

  • 0 to 200 m: 100%
  • 200 to 1,000 m: 0%
  • 1,000 to 4,000 m: 0%
  • 4,000 to 6,000 m: 0%
  • below 6,000 m: 0%

Named features near the deepest point: Cameron Island Rise (472 km), Desbarats Basin (493 km), Lougheed Basin (529 km), Lougheed Island Basin (531 km).

The Wynniatt Bay if sea level dropped

The slider on the map lowers the sea in steps. This table shows how much of the Wynniatt Bay's water would be land at each step.

Sea level lowered byBecomes landShare of its water
10 m112 km²10%
20 m177 km²15.8%
50 m306 km²27.2%
80 m479 km²42.6%
120 m827 km²73.5%
200 m1,124 km²100%
500 m1,124 km²100%
1,000 m1,124 km²100%
2,000 m1,124 km²100%
3,000 m1,124 km²100%
4,000 m1,124 km²100%
6,000 m1,124 km²100%

A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how water would really drain.

Nearby seas

Nearest by the centre of each outline. All oceans and seas

Frequently asked questions

How deep is the Wynniatt Bay?

On average about 85 m in the GEBCO grid (the middle value is 89 m). The deepest cell inside its outline is 199 m, at 72.69° N, 110.47° W.

How big is the Wynniatt Bay?

About 1,124 km² of water inside its Natural Earth outline, counted from the grid cells that are below sea level.

How much of the Wynniatt Bay would be land if sea level dropped?

With the sea 10 m lower, about 112 km² (10%) of its water would be land. At 6,000 m lower, 100% would be. This is a simple bathtub model that lowers the sea evenly everywhere.

Data: depths from the GEBCO_2026 grid, statistics worked out inside the Natural Earth outline of the bay. See data sources and licences. The GEBCO Grid should NOT be used for navigation or for any other purpose involving safety at sea.

All oceans and seas · Undersea features · Drain the oceans

Embed this map

Copy this code into your web page. It is free to use. Please keep the link under the map, as it is how people find where the map comes from.