Baffin Bay depth map

Bay: average depth about 943 m, deepest 2,423 m (GEBCO_2026 grid).

Tap or scroll to load the interactive map

Sea level todayDrag the slider to lower the sea and see the land that would appear.

Sea level in metres below today’s. A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how the water would really drain.

Key

Sea depth

  • Deeper than 6,000 m
  • 4,000 to 6,000 m
  • 2,000 to 4,000 m
  • 1,000 to 2,000 m
  • 200 to 1,000 m
  • Shallower than 200 m (the continental shelf)

Land height

  • Land up to 500 m
  • 500 to 2,000 m
  • Above 2,000 m

Drain the oceans

  • Seabed exposed when the sea is lowered A dashed white line marks today’s coast.

How to read the map. Darker blue is deeper water. Tap anywhere to see how deep the sea is there, or how high the land is, and the nearest named undersea feature. Depths come from the GEBCO_2026 grid, which in most of the deep ocean is predicted from satellite measurements of the sea surface rather than surveyed by ship, and the map’s tiles are coarser than the grid, so narrow trenches read shallower on the map than their true depth. Not for navigation.

Baffin Bay at a glance

  • 943 maverage depth
  • 648 mmedian depth
  • 2,423 mmaximum depth
  • 440,656 km²water area

Baffin Bay is a bay. Inside its outline the GEBCO grid has about 440,656 km² of water, with an average depth of about 943 m (the middle value is 648 m) and a maximum of 2,423 m, found at 72.29° N, 66.46° W.

Open the map at the deepest cell and tap to read the depth.

How deep is each part of the Baffin Bay?

The bar splits the Baffin Bay's water by depth. Each colour is a depth band, and the shares add up to 100%.

  • 0 to 200 m: 11%
  • 200 to 1,000 m: 55.3%
  • 1,000 to 4,000 m: 33.8%
  • 4,000 to 6,000 m: 0%
  • below 6,000 m: 0%

Named features near the deepest point: Baffin Basin (60 km), Ikpiugaaluk (672 km), Cumberland Basin (772 km), Barrow Basin (822 km).

The Baffin Bay if sea level dropped

The slider on the map lowers the sea in steps. This table shows how much of the Baffin Bay's water would be land at each step.

Sea level lowered byBecomes landShare of its water
10 m1,351 km²0.3%
20 m2,334 km²0.5%
50 m6,070 km²1.4%
80 m10,857 km²2.5%
120 m20,181 km²4.6%
200 m48,267 km²11%
500 m169,290 km²38.4%
1,000 m291,908 km²66.2%
2,000 m362,350 km²82.2%
3,000 m440,656 km²100%
4,000 m440,656 km²100%
6,000 m440,656 km²100%

A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how water would really drain.

Nearby seas

Nearest by the centre of each outline. All oceans and seas

Frequently asked questions

How deep is the Baffin Bay?

On average about 943 m in the GEBCO grid (the middle value is 648 m). The deepest cell inside its outline is 2,423 m, at 72.29° N, 66.46° W.

How big is the Baffin Bay?

About 440,656 km² of water inside its Natural Earth outline, counted from the grid cells that are below sea level.

How much of the Baffin Bay would be land if sea level dropped?

With the sea 50 m lower, about 6,070 km² (1.4%) of its water would be land. At 6,000 m lower, 100% would be. This is a simple bathtub model that lowers the sea evenly everywhere.

Data: depths from the GEBCO_2026 grid, statistics worked out inside the Natural Earth outline of the bay. See data sources and licences. The GEBCO Grid should NOT be used for navigation or for any other purpose involving safety at sea.

All oceans and seas · Undersea features · Drain the oceans

Embed this map

Copy this code into your web page. It is free to use. Please keep the link under the map, as it is how people find where the map comes from.