Tasman Sea depth map

Sea: average depth about 3,360 m, deepest 6,281 m (GEBCO_2026 grid).

Tap or scroll to load the interactive map

Sea level todayDrag the slider to lower the sea and see the land that would appear.

Sea level in metres below today’s. A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how the water would really drain.

Key

Sea depth

  • Deeper than 6,000 m
  • 4,000 to 6,000 m
  • 2,000 to 4,000 m
  • 1,000 to 2,000 m
  • 200 to 1,000 m
  • Shallower than 200 m (the continental shelf)

Land height

  • Land up to 500 m
  • 500 to 2,000 m
  • Above 2,000 m

Drain the oceans

  • Seabed exposed when the sea is lowered A dashed white line marks today’s coast.

How to read the map. Darker blue is deeper water. Tap anywhere to see how deep the sea is there, or how high the land is, and the nearest named undersea feature. Depths come from the GEBCO_2026 grid, which in most of the deep ocean is predicted from satellite measurements of the sea surface rather than surveyed by ship, and the map’s tiles are coarser than the grid, so narrow trenches read shallower on the map than their true depth. Not for navigation.

Tasman Sea at a glance

  • 3,360 maverage depth
  • 4,314 mmedian depth
  • 6,281 mmaximum depth
  • 3.3 million km²water area

Tasman Sea is a sea. Inside its outline the GEBCO grid has about 3.3 million km² of water, with an average depth of about 3,360 m (the middle value is 4,314 m) and a maximum of 6,281 m, found at 48.51° S, 164.30° E.

Open the map at the deepest cell and tap to read the depth.

How deep is each part of the Tasman Sea?

The bar splits the Tasman Sea's water by depth. Each colour is a depth band, and the shares add up to 100%.

  • 0 to 200 m: 4.9%
  • 200 to 1,000 m: 7.8%
  • 1,000 to 4,000 m: 33.1%
  • 4,000 to 6,000 m: 54.2%
  • below 6,000 m: 0%

Named features near the deepest point: Puysegur Trench (55 km), Puysegur Plateau (249 km), Christable Seamount (280 km), Mason Canyon (287 km).

The Tasman Sea if sea level dropped

The slider on the map lowers the sea in steps. This table shows how much of the Tasman Sea's water would be land at each step.

Sea level lowered byBecomes landShare of its water
10 m3,344 km²0.1%
20 m8,604 km²0.3%
50 m34,839 km²1%
80 m61,340 km²1.8%
120 m103,696 km²3.1%
200 m162,159 km²4.9%
500 m208,320 km²6.2%
1,000 m423,101 km²12.7%
2,000 m904,813 km²27.1%
3,000 m1.2 million km²37.1%
4,000 m1.5 million km²45.8%
6,000 m3.3 million km²100%

A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how water would really drain.

Nearby seas

Nearest by the centre of each outline. All oceans and seas

Frequently asked questions

How deep is the Tasman Sea?

On average about 3,360 m in the GEBCO grid (the middle value is 4,314 m). The deepest cell inside its outline is 6,281 m, at 48.51° S, 164.30° E.

How big is the Tasman Sea?

About 3.3 million km² of water inside its Natural Earth outline, counted from the grid cells that are below sea level.

How much of the Tasman Sea would be land if sea level dropped?

With the sea 50 m lower, about 34,839 km² (1%) of its water would be land. At 6,000 m lower, 100% would be. This is a simple bathtub model that lowers the sea evenly everywhere.

Data: depths from the GEBCO_2026 grid, statistics worked out inside the Natural Earth outline of the sea. See data sources and licences. The GEBCO Grid should NOT be used for navigation or for any other purpose involving safety at sea.

All oceans and seas · Undersea features · Drain the oceans

Embed this map

Copy this code into your web page. It is free to use. Please keep the link under the map, as it is how people find where the map comes from.