Straits of Florida depth map

Strait: average depth about 669 m, deepest 2,126 m (GEBCO_2026 grid).

Tap or scroll to load the interactive map

Sea level todayDrag the slider to lower the sea and see the land that would appear.

Sea level in metres below today’s. A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how the water would really drain.

Key

Sea depth

  • Deeper than 6,000 m
  • 4,000 to 6,000 m
  • 2,000 to 4,000 m
  • 1,000 to 2,000 m
  • 200 to 1,000 m
  • Shallower than 200 m (the continental shelf)

Land height

  • Land up to 500 m
  • 500 to 2,000 m
  • Above 2,000 m

Drain the oceans

  • Seabed exposed when the sea is lowered A dashed white line marks today’s coast.

How to read the map. Darker blue is deeper water. Tap anywhere to see how deep the sea is there, or how high the land is, and the nearest named undersea feature. Depths come from the GEBCO_2026 grid, which in most of the deep ocean is predicted from satellite measurements of the sea surface rather than surveyed by ship, and the map’s tiles are coarser than the grid, so narrow trenches read shallower on the map than their true depth. Not for navigation.

Straits of Florida at a glance

  • 669 maverage depth
  • 688 mmedian depth
  • 2,126 mmaximum depth
  • 85,535 km²water area

Straits of Florida is a strait. Inside its outline the GEBCO grid has about 85,535 km² of water, with an average depth of about 669 m (the middle value is 688 m) and a maximum of 2,126 m, found at 23.29° N, 83.03° W.

Open the map at the deepest cell and tap to read the depth.

How deep is each part of the Straits of Florida?

The bar splits the Straits of Florida's water by depth. Each colour is a depth band, and the shares add up to 100%.

  • 0 to 200 m: 29.5%
  • 200 to 1,000 m: 45.6%
  • 1,000 to 4,000 m: 24.9%
  • 4,000 to 6,000 m: 0%
  • below 6,000 m: 0%

Named features near the deepest point: Cayman Trough (533 km), Great Bahama Canyon (637 km), Walton fault zone (675 km), Sigsbee Deep (874 km).

The Straits of Florida if sea level dropped

The slider on the map lowers the sea in steps. This table shows how much of the Straits of Florida's water would be land at each step.

Sea level lowered byBecomes landShare of its water
10 m19,189 km²22.4%
20 m22,822 km²26.7%
50 m23,415 km²27.4%
80 m23,829 km²27.9%
120 m24,281 km²28.4%
200 m25,266 km²29.5%
500 m32,835 km²38.4%
1,000 m64,250 km²75.1%
2,000 m85,115 km²99.5%
3,000 m85,535 km²100%
4,000 m85,535 km²100%
6,000 m85,535 km²100%

A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how water would really drain.

Nearby seas

Nearest by the centre of each outline. All oceans and seas

Frequently asked questions

How deep is the Straits of Florida?

On average about 669 m in the GEBCO grid (the middle value is 688 m). The deepest cell inside its outline is 2,126 m, at 23.29° N, 83.03° W.

How big is the Straits of Florida?

About 85,535 km² of water inside its Natural Earth outline, counted from the grid cells that are below sea level.

How much of the Straits of Florida would be land if sea level dropped?

With the sea 10 m lower, about 19,189 km² (22.4%) of its water would be land. At 6,000 m lower, 100% would be. This is a simple bathtub model that lowers the sea evenly everywhere.

Data: depths from the GEBCO_2026 grid, statistics worked out inside the Natural Earth outline of the strait. See data sources and licences. The GEBCO Grid should NOT be used for navigation or for any other purpose involving safety at sea.

All oceans and seas · Undersea features · Drain the oceans

Embed this map

Copy this code into your web page. It is free to use. Please keep the link under the map, as it is how people find where the map comes from.