Gulf of Thailand depth map

Gulf: average depth about 42 m, deepest 107 m (GEBCO_2026 grid).

Tap or scroll to load the interactive map

Sea level todayDrag the slider to lower the sea and see the land that would appear.

Sea level in metres below today’s. A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how the water would really drain.

Key

Sea depth

  • Deeper than 6,000 m
  • 4,000 to 6,000 m
  • 2,000 to 4,000 m
  • 1,000 to 2,000 m
  • 200 to 1,000 m
  • Shallower than 200 m (the continental shelf)

Land height

  • Land up to 500 m
  • 500 to 2,000 m
  • Above 2,000 m

Drain the oceans

  • Seabed exposed when the sea is lowered A dashed white line marks today’s coast.

How to read the map. Darker blue is deeper water. Tap anywhere to see how deep the sea is there, or how high the land is, and the nearest named undersea feature. Depths come from the GEBCO_2026 grid, which in most of the deep ocean is predicted from satellite measurements of the sea surface rather than surveyed by ship, and the map’s tiles are coarser than the grid, so narrow trenches read shallower on the map than their true depth. Not for navigation.

Gulf of Thailand at a glance

  • 42 maverage depth
  • 45 mmedian depth
  • 107 mmaximum depth
  • 293,746 km²water area

Gulf of Thailand is a gulf. Inside its outline the GEBCO grid has about 293,746 km² of water, with an average depth of about 42 m (the middle value is 45 m) and a maximum of 107 m, found at 7.84° N, 102.51° E.

Open the map at the deepest cell and tap to read the depth.

How deep is each part of the Gulf of Thailand?

The bar splits the Gulf of Thailand's water by depth. Each colour is a depth band, and the shares add up to 100%.

  • 0 to 200 m: 100%
  • 200 to 1,000 m: 0%
  • 1,000 to 4,000 m: 0%
  • 4,000 to 6,000 m: 0%
  • below 6,000 m: 0%

Named features near the deepest point: Reed Tablemount (1,618 km), Ninety East Ridge (1,837 km), Manila Trench (1,953 km), Sulu Trench (2,084 km).

The Gulf of Thailand if sea level dropped

The slider on the map lowers the sea in steps. This table shows how much of the Gulf of Thailand's water would be land at each step.

Sea level lowered byBecomes landShare of its water
10 m19,512 km²6.6%
20 m52,343 km²17.8%
50 m172,563 km²58.7%
80 m293,209 km²99.8%
120 m293,746 km²100%
200 m293,746 km²100%
500 m293,746 km²100%
1,000 m293,746 km²100%
2,000 m293,746 km²100%
3,000 m293,746 km²100%
4,000 m293,746 km²100%
6,000 m293,746 km²100%

A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how water would really drain.

Nearby seas

Nearest by the centre of each outline. All oceans and seas

Frequently asked questions

How deep is the Gulf of Thailand?

On average about 42 m in the GEBCO grid (the middle value is 45 m). The deepest cell inside its outline is 107 m, at 7.84° N, 102.51° E.

How big is the Gulf of Thailand?

About 293,746 km² of water inside its Natural Earth outline, counted from the grid cells that are below sea level.

How much of the Gulf of Thailand would be land if sea level dropped?

With the sea 10 m lower, about 19,512 km² (6.6%) of its water would be land. At 6,000 m lower, 100% would be. This is a simple bathtub model that lowers the sea evenly everywhere.

Data: depths from the GEBCO_2026 grid, statistics worked out inside the Natural Earth outline of the gulf. See data sources and licences. The GEBCO Grid should NOT be used for navigation or for any other purpose involving safety at sea.

All oceans and seas · Undersea features · Drain the oceans

Embed this map

Copy this code into your web page. It is free to use. Please keep the link under the map, as it is how people find where the map comes from.