Delaware Bay depth map

Bay: average depth about 6 m, deepest 45 m (GEBCO_2026 grid).

Tap or scroll to load the interactive map

Sea level todayDrag the slider to lower the sea and see the land that would appear.

Sea level in metres below today’s. A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how the water would really drain.

Key

Sea depth

  • Deeper than 6,000 m
  • 4,000 to 6,000 m
  • 2,000 to 4,000 m
  • 1,000 to 2,000 m
  • 200 to 1,000 m
  • Shallower than 200 m (the continental shelf)

Land height

  • Land up to 500 m
  • 500 to 2,000 m
  • Above 2,000 m

Drain the oceans

  • Seabed exposed when the sea is lowered A dashed white line marks today’s coast.

How to read the map. Darker blue is deeper water. Tap anywhere to see how deep the sea is there, or how high the land is, and the nearest named undersea feature. Depths come from the GEBCO_2026 grid, which in most of the deep ocean is predicted from satellite measurements of the sea surface rather than surveyed by ship, and the map’s tiles are coarser than the grid, so narrow trenches read shallower on the map than their true depth. Not for navigation.

Delaware Bay at a glance

  • 6 maverage depth
  • 5 mmedian depth
  • 45 mmaximum depth
  • 1,907 km²water area

Delaware Bay is a bay. It is very shallow: nowhere in it is deeper than a few tens of metres in the grid. Inside its outline the GEBCO grid has about 1,907 km² of water, with an average depth of about 6 m (the middle value is 5 m) and a maximum of 45 m, found at 38.85° N, 75.08° W.

Open the map at the deepest cell and tap to read the depth.

How deep is each part of the Delaware Bay?

The bar splits the Delaware Bay's water by depth. Each colour is a depth band, and the shares add up to 100%.

  • 0 to 200 m: 100%
  • 200 to 1,000 m: 0%
  • 1,000 to 4,000 m: 0%
  • 4,000 to 6,000 m: 0%
  • below 6,000 m: 0%

Named features near the deepest point: Hudson Canyon (242 km), Hydrographer Canyon (536 km), Gasline Ridge (559 km), Point Petre Ridge (567 km).

The Delaware Bay if sea level dropped

The slider on the map lowers the sea in steps. This table shows how much of the Delaware Bay's water would be land at each step.

Sea level lowered byBecomes landShare of its water
10 m1,600 km²83.9%
20 m1,862 km²97.6%
50 m1,907 km²100%
80 m1,907 km²100%
120 m1,907 km²100%
200 m1,907 km²100%
500 m1,907 km²100%
1,000 m1,907 km²100%
2,000 m1,907 km²100%
3,000 m1,907 km²100%
4,000 m1,907 km²100%
6,000 m1,907 km²100%

A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how water would really drain.

Nearby seas

Nearest by the centre of each outline. All oceans and seas

Frequently asked questions

How deep is the Delaware Bay?

On average about 6 m in the GEBCO grid (the middle value is 5 m). The deepest cell inside its outline is 45 m, at 38.85° N, 75.08° W.

How big is the Delaware Bay?

About 1,907 km² of water inside its Natural Earth outline, counted from the grid cells that are below sea level.

How much of the Delaware Bay would be land if sea level dropped?

With the sea 10 m lower, about 1,600 km² (83.9%) of its water would be land. At 6,000 m lower, 100% would be. This is a simple bathtub model that lowers the sea evenly everywhere.

Data: depths from the GEBCO_2026 grid, statistics worked out inside the Natural Earth outline of the bay. See data sources and licences. The GEBCO Grid should NOT be used for navigation or for any other purpose involving safety at sea.

All oceans and seas · Undersea features · Drain the oceans

Embed this map

Copy this code into your web page. It is free to use. Please keep the link under the map, as it is how people find where the map comes from.