Ceram Sea depth map

Sea: average depth about 1,196 m, deepest 5,711 m (GEBCO_2026 grid).

Tap or scroll to load the interactive map

Sea level todayDrag the slider to lower the sea and see the land that would appear.

Sea level in metres below today’s. A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how the water would really drain.

Key

Sea depth

  • Deeper than 6,000 m
  • 4,000 to 6,000 m
  • 2,000 to 4,000 m
  • 1,000 to 2,000 m
  • 200 to 1,000 m
  • Shallower than 200 m (the continental shelf)

Land height

  • Land up to 500 m
  • 500 to 2,000 m
  • Above 2,000 m

Drain the oceans

  • Seabed exposed when the sea is lowered A dashed white line marks today’s coast.

How to read the map. Darker blue is deeper water. Tap anywhere to see how deep the sea is there, or how high the land is, and the nearest named undersea feature. Depths come from the GEBCO_2026 grid, which in most of the deep ocean is predicted from satellite measurements of the sea surface rather than surveyed by ship, and the map’s tiles are coarser than the grid, so narrow trenches read shallower on the map than their true depth. Not for navigation.

Ceram Sea at a glance

  • 1,196 maverage depth
  • 878 mmedian depth
  • 5,711 mmaximum depth
  • 154,026 km²water area

Ceram Sea is a sea. Inside its outline the GEBCO grid has about 154,026 km² of water, with an average depth of about 1,196 m (the middle value is 878 m) and a maximum of 5,711 m, found at 2.53° S, 127.09° E.

Open the map at the deepest cell and tap to read the depth.

How deep is each part of the Ceram Sea?

The bar splits the Ceram Sea's water by depth. Each colour is a depth band, and the shares add up to 100%.

  • 0 to 200 m: 28.4%
  • 200 to 1,000 m: 26.8%
  • 1,000 to 4,000 m: 40.4%
  • 4,000 to 6,000 m: 4.4%
  • below 6,000 m: 0%

Named features near the deepest point: Nieuwerkerk (526 km), Yersey (656 km), Timor Trough (720 km), Sangihe Trench (771 km).

The Ceram Sea if sea level dropped

The slider on the map lowers the sea in steps. This table shows how much of the Ceram Sea's water would be land at each step.

Sea level lowered byBecomes landShare of its water
10 m7,739 km²5%
20 m12,444 km²8.1%
50 m25,571 km²16.6%
80 m33,696 km²21.9%
120 m39,289 km²25.5%
200 m43,684 km²28.4%
500 m55,095 km²35.8%
1,000 m84,919 km²55.1%
2,000 m122,630 km²79.6%
3,000 m137,672 km²89.4%
4,000 m147,208 km²95.6%
6,000 m154,026 km²100%

A simple bathtub model: it lowers the sea everywhere by the same amount and does not simulate how water would really drain.

Nearby seas

Nearest by the centre of each outline. All oceans and seas

Frequently asked questions

How deep is the Ceram Sea?

On average about 1,196 m in the GEBCO grid (the middle value is 878 m). The deepest cell inside its outline is 5,711 m, at 2.53° S, 127.09° E.

How big is the Ceram Sea?

About 154,026 km² of water inside its Natural Earth outline, counted from the grid cells that are below sea level.

How much of the Ceram Sea would be land if sea level dropped?

With the sea 10 m lower, about 7,739 km² (5%) of its water would be land. At 6,000 m lower, 100% would be. This is a simple bathtub model that lowers the sea evenly everywhere.

Data: depths from the GEBCO_2026 grid, statistics worked out inside the Natural Earth outline of the sea. See data sources and licences. The GEBCO Grid should NOT be used for navigation or for any other purpose involving safety at sea.

All oceans and seas · Undersea features · Drain the oceans

Embed this map

Copy this code into your web page. It is free to use. Please keep the link under the map, as it is how people find where the map comes from.